Bissell Big Green Machine Manual: A Comprehensive Guide
Welcome to the comprehensive guide for your Bissell Big Green Machine! This manual will walk you through everything from initial setup and assembly to operating instructions, maintenance, and troubleshooting. Ensure optimal performance and longevity!
Understanding Your Bissell Big Green
The Bissell Big Green Machine is a powerful carpet cleaning system designed for deep cleaning and professional-grade results. It’s engineered to outperform standard carpet cleaners, providing superior suction and cleaning power. Understanding its features and capabilities is crucial for effective use and maintenance.
This machine is equipped with a large-capacity tank for both clean and dirty water, allowing for extended cleaning sessions without frequent refills. The powerful brush rolls agitate carpet fibers to loosen dirt and stains, while the strong suction extracts the dirty water, leaving carpets clean and refreshed.
The Big Green is versatile and can be used on various carpet types. Regular use of the Bissell Big Green can help maintain the appearance and cleanliness of your carpets, removing embedded dirt, allergens, and odors. Familiarize yourself with the machine’s components, settings, and the recommended cleaning solutions for best results.
Initial Setup and Assembly
Proper setup and assembly are crucial for the optimal performance of your Bissell Big Green Machine. Follow these instructions carefully to ensure all components are correctly installed before first use, preventing any operational issues.
Unboxing and Parts Identification
Upon receiving your Bissell Big Green Machine, carefully unbox all components. Identify each part using the included parts list. Ensure you have the main machine body, the clean water tank, the dirty water tank, and the power cord. Check for any damage during shipping.
Locate the handle assembly, typically separate for compact packaging. The brush roll and the floor nozzle are pre-installed but should be inspected for proper seating. Identify any included attachments such as the hose and spot cleaning tools, if applicable to your model.
Consult the user manual for a detailed diagram of all parts. Verify that all listed components are present before proceeding with the assembly. Missing or damaged parts should be reported to Bissell customer service immediately for prompt resolution.
Familiarize yourself with the location of each component for easy access during assembly and future maintenance. Proper identification ensures a smooth setup process and efficient operation.
Assembling the Machine
Begin the assembly by attaching the handle to the main body of the Bissell Big Green Machine. Align the handle with the designated slot and secure it using the provided screws. Ensure the handle is firmly attached for comfortable maneuvering during use.
Next, position the clean water tank onto its designated base, ensuring it clicks into place securely. Repeat this process for the dirty water tank, making sure it is properly aligned and latched to prevent leaks during operation.
Connect the hose, if applicable, to the appropriate port on the machine. Ensure the connection is tight to maintain suction power. Secure any additional attachments, such as spot cleaning tools, to the hose or designated storage areas.
Finally, plug in the power cord and check all connections to ensure they are secure. Refer to the user manual for specific assembly diagrams and instructions. Double-check all parts are correctly assembled before first use.
Operating Instructions
Learn how to effectively operate your Bissell Big Green Machine. This section covers filling tanks, adding solution, cleaning techniques, and emptying the dirty water tank, ensuring a spotless and fresh carpet every time.
Filling the Clean Water Tank
Before commencing any cleaning operation with your Bissell Big Green Machine, ensuring the clean water tank is adequately filled is paramount. Locate the clean water tank, typically situated at the top or rear of the machine, depending on your specific model. Detach the tank from the main unit by releasing any locking mechanisms or latches that secure it in place.
Once detached, carefully unscrew or open the tank’s cap, usually marked with indicators for “water” or “clean water.” Using a clean water source, such as tap water, fill the tank to the indicated maximum fill line. Note that using hot tap water is often recommended for enhanced cleaning performance, but always adhere to the guidelines in your user manual to prevent damage.
Avoid overfilling the tank, as this can lead to leaks or operational issues. After filling, securely close the cap, ensuring it is tightly sealed to prevent spillage during operation. Reattach the filled tank to the main unit, making sure it clicks or locks into place correctly. Verify the tank is stable and properly aligned before proceeding to add the cleaning solution.
Adding Cleaning Solution
After filling the clean water tank, the next crucial step is adding the appropriate cleaning solution. Using the correct solution and amount ensures effective cleaning and prevents damage to your Bissell Big Green Machine. Always use Bissell-approved cleaning solutions designed specifically for carpet cleaning machines.
Locate the solution fill line on the clean water tank. This line indicates the maximum amount of cleaning solution that should be added. Carefully pour the selected Bissell cleaning solution into the tank, ensuring you do not exceed the fill line. Overfilling can cause the machine to malfunction or leave excessive residue on your carpets.
Refer to the solution bottle for specific dosage instructions, as concentrations may vary. For heavily soiled carpets, you might consider using a slightly higher concentration, but always stay within the recommended limits. Once the solution is added, securely close the tank cap and reattach the tank to the machine.
Gently rock the tank to mix the water and solution thoroughly before commencing your cleaning session. Using the correct cleaning solution ensures optimal performance and extends the life of your machine.
Cleaning Your Carpets: Step-by-Step
Now that your Bissell Big Green Machine is assembled and ready, follow these steps to effectively clean your carpets. Begin by vacuuming the area thoroughly to remove loose dirt and debris. This preliminary step maximizes the cleaning power of your machine.
Plug the machine into a grounded electrical outlet. With the clean water tank filled and the cleaning solution added, turn on the power switch. Select the appropriate cleaning mode based on your carpet type and soil level. Most machines offer settings for light cleaning and deep cleaning.
Holding the handle, gently push the machine forward while squeezing the trigger to release the cleaning solution. Overlap each pass slightly to ensure complete coverage. Slowly pull the machine backward, allowing it to extract the dirty water. Avoid saturating the carpet excessively.
Continue this process until the entire carpeted area is cleaned. For stubborn stains, pre-treat the area with a stain remover before using the machine. After cleaning, allow the carpet to air dry completely, ensuring proper ventilation. Empty the dirty water tank as needed during the cleaning process.
Emptying the Dirty Water Tank
Regularly emptying the dirty water tank is crucial for maintaining optimal cleaning performance of your Bissell Big Green Machine. As you clean, the dirty water tank will gradually fill with extracted water and debris. Overfilling the tank can reduce suction power and potentially damage the machine.
To empty the tank, first, turn off and unplug the machine from the electrical outlet. Locate the dirty water tank, typically at the bottom or back of the machine. Carefully detach the tank from the machine, following the specific instructions outlined in your model’s user manual.
Carry the tank to a sink or drain. Remove the tank’s lid or stopper, and pour the dirty water into the drain. Rinse the tank thoroughly with clean water to remove any remaining residue or sediment. Inspect the tank for any blockages or clogs, and clear them as needed.
Before reattaching the tank, ensure that the float mechanism is clean and moves freely. This mechanism prevents the tank from overfilling. Securely reattach the tank to the machine, making sure it is properly aligned and locked into place. The machine is now ready for continued use.
Maintenance and Troubleshooting
Proper maintenance ensures your Bissell Big Green Machine operates efficiently and lasts longer. This section covers routine cleaning and care, along with solutions for common issues, helping you keep your machine in top condition.
Routine Maintenance: Cleaning and Care
To keep your Bissell Big Green Machine running smoothly, regular maintenance is essential. After each use, thoroughly empty and rinse both the clean and dirty water tanks to prevent residue buildup. Clean the brush rolls by removing any hair or debris that may have accumulated during operation.
Periodically check the nozzles and suction paths for clogs, using a small brush or tool to clear any obstructions. Wipe down the exterior of the machine with a damp cloth to remove dirt and spills. Store the machine in a dry place to prevent mold and mildew growth.
Inspect the power cord for any signs of damage, and ensure it is properly stored to avoid kinks or breaks. Replace the brush rolls as needed to maintain optimal cleaning performance. Following these routine steps will extend the life of your Bissell Big Green Machine and ensure it is always ready for use.
Troubleshooting Common Issues
Encountering issues with your Bissell Big Green Machine? Let’s troubleshoot some common problems. If the machine isn’t spraying, check if the water tank is filled and properly seated. Ensure the nozzle is free from obstructions. If suction is weak, empty the dirty water tank and clean the brush rolls and filters.
If the machine is leaking, inspect the tanks and hoses for cracks or loose connections. Make sure the caps and seals are securely in place. If the brush rolls aren’t turning, check for tangled debris and remove any obstructions. Reset the machine if needed.
If you experience unusual noises, inspect the machine for loose parts or foreign objects. Refer to the user manual for specific troubleshooting steps related to your model. If problems persist, contact Bissell customer support for further assistance. Regular maintenance can help prevent many common issues, ensuring your machine operates efficiently.
Safety Precautions
Prioritize safety when operating your Bissell Big Green Machine. Always read all instructions before use. Reduce the risk of fire, electric shock, or injury by following guidelines. Unplug before maintenance.
Important Safety Instructions
Before using your Bissell Big Green Deep Cleaning Machine, carefully read all safety instructions. Always unplug the machine from the electrical outlet when not in use and before performing any cleaning, maintenance, or servicing. This prevents accidental electrical shock or injury.
To reduce the risk of fire, electric shock, or injury, adhere to these warnings: Never leave the machine unattended while plugged in. Only use the machine on surfaces specified in the manual to avoid damage. Do not expose the machine to rain or excessive moisture.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Use only cleaning solutions recommended by Bissell, as others may damage the machine or create a hazard. Store the machine indoors in a dry place.
Ensure the power cord is not damaged before each use. If the cord is damaged, it must be replaced by the manufacturer or a qualified technician. Do not operate the machine with a damaged cord or plug.
Warranty Information
Understanding your Bissell Big Green Machine warranty is crucial. Review the warranty details to know your coverage period and what is included. Contact Bissell directly for specific warranty inquiries and support.
Understanding Your Warranty Coverage
Your Bissell Big Green Machine comes with a warranty designed to protect your investment. To fully understand your coverage, carefully review the warranty document included with your purchase. This document outlines the duration of the warranty period and the specific components or issues covered.
Typically, the warranty covers defects in materials and workmanship under normal household use. It’s essential to register your Big Green Machine with Bissell to ensure proper warranty activation and facilitate any future claims. The registration process usually involves providing your purchase date, model number, and personal contact information through Bissell’s website or by mailing in the warranty card.
Keep in mind that the warranty may not cover damages resulting from misuse, neglect, unauthorized repairs, or failure to follow the operating instructions. Regular maintenance, as outlined in the user manual, is crucial to keeping your warranty valid. If you encounter any issues covered by the warranty, contact Bissell’s customer support with your model number and proof of purchase to initiate a claim.